Here are some of my
favorite sites:
My HobbiesMy ShackProjectsWeatherEMWINAPTWefaxHRPTMisc WeatherHamATVAPRSSlow Scan TVMiscPhotographyHam Radio RelatedVoIP Hurricane NetARRLWebPart 97Frequency Allocations(ARISS)W4EHW Home PageAMSATAMSAT NETQuick callsign lookup:
Ham Radio DatabaseBuckmasterQRZUniversity of ArkansasHighlanderThe Official SiteUnofficial Site.Mailing ListFAQNasa/SpaceNASANASA Space FlightJPLOffice of Space FlightDeep Space NetworkShuttle WebISS WebNASA TVFuture Shuttle MissionsFuture Shuttle MissionsHubble Space TelescopeHST Greatest HitsHST PhotosHST Data ArchiveMars Rover MissionSpace.comSpace WeatherSETI@homeMy other websitesPRSGCPR SkywarnPR APRS NetworkMiscVirtual Weather StationPeet Bros. Weather StationDavis Weather Station
NOAAPORT DVB-S Reception
Installing and Configuring the Novra S75 DVB-S Receiver
- Company website www.novra.com (model S75).
- Physical Connection - 3.0 of S75 Receiver Instructions. For the initial setup you will need to use a computer running Microsoft Windows. Once the DVB-S receiver has been configured you will no longer need the Windows computer.
- IP configuration - sections 4.1 and 4.2 of S75 Receiver Instructions. Connect the DVB-S receiver to a Windows computer via a crossover cable and you can used the settings listed below.
- In the Network Configuration window of the DVB configuration utility:
- Receiver IP Address: 192.168.1.10
- Subnet Mask: 255.255.255.0
- Default Gateway: 192.168.1.3
- Enable IGMP Filtering: unchecked
- Status Destination Port: 0x1974
- Status Destination IP: 255.255.255.255
- Content Configuration - section 4.3 of S75 Receiver Instructions
- Click on the Content button in the S75 Management Console and the Content Configuration window should appear.
- Enter 101 into the PID field and click on the Add--> button.
- Repeat step B with the values; 102, 103, and 104.
- Click the Send button.
- Satellite Configuration - section 4.4 of S75 Receiver Instructions. Note: The values in steps B and C are subject to change dependent upon NWS actions.
- Click on the Satellite button in the S75 Management Console, and the Satellite Configuration window should appear.
- Enter 6.349 into the Symbol Rate field.
- Enter 1193.5 into the Frequency field.
- Make sure that the LNB Power On? check box is not selected.
- Click the Send button.
- The main window of the S75 Management Console should now display the settings listed below.
- In the Network section:
- Receiver IP Address: 192.168.1.10
- Default Gateway: 192.168.1.3
- Subnet Mask: 255.255.255.0
- Status Destination IP: 255.255.255.255
- DVB MAC Address: (use factory setting, unique for each receiver)
- IGMP Filter Enabled: unchecked
- In the Satellite section:
- Symbol Rate (Msps): 6.349
- Frequency (MHz): 1193.5
- Viterbi Code Rate: 7/8
- Viterbi BER (should be very small, near zero)
- Uncorrectable Errors (also very small, preferably zero)
- In the Selected Contents section:
- The items in the list box should reflect the PIDs that you entered in step #4 above.
- In the LNB Configuration section:
- LNB Power: unchecked
- LDB Fault: unchecked
- Disconnect the DVB-S receiver from the Windows computer.
- Connect the DVB-S receiver to the NOAAPORT ingest computer.
|
If you have a comments, questions or suggestion about the website please e-mail webmaster@hwic.net
| |
| © Copyright 2000, HWIC. All Rights Reserved |